Hi Alaska Wife 14,
As far as the 120 VAC outlets having no power, it could be from the Ground Fault Circuit Interrupter. See
page 6-4 of your Owner's Manual.
As far as the transmission not shifting into 5th gear (overdrive,) it might be a pre-programmed protection for the engine. Your error codes are:
- P0300 = Multiple Misfires
- P0420 = Oxygen Level too low (i.e. fuel level too high)
- P0141 = Oxygen Sensor Heating Circuit Malfunction
The combination makes me think you are running too rich without a specific cylinder failure. This sounds like a stuck fuel injector to me.
I would take it to a good engine man and hold-off on the transmission specialist. Please let us know what your mechanic determines.
Thanks, Eagle5