It appears the brackets a glued to the roof and then the flaring piece is attached to them. It has no function just blends the cab to the body.
[/QUOTE]
Mine were glued on with a little duct tape on the side. I took the fairing off to check the seals and the brackets pulled off with minimal effort. I reinstalled the brackets by taping them on with durabond tape, sealed the interface between the roof and cab with same, then re-attached the fairing. I believe its purpose is to improve the aerodynamics in the transition from cab to roof. I ended up with a 1/2 inch space between the 2 (that may contribute to the thing blowing off in the first place). That I sealed with duct tape (matched the color better than the durabond) to reduce the wind noise caused by air flowing over the gap.
|