My slide out seals are pulled loose from the glue probably caused by not being exercised often enough. i am guessing the rubber stuck to the side of the motor home when extended causing them to pull loose.
I am looking for recommendations as to what type of adhesive to use to glue them back on and what to spray on the mating surface to outside walls to prevent sticking. I've had motor homes for many years and this is the first incident. (First time for every thing) ha
Quarterly, I coat all of our slide seals with this product, to prevent sticking and cracking.
As for gluing the rubber back in place, Winnebago probably has a call out sheet for that, but make sure whatever you use, won’t degrade the rubber. Something with a petroleum component might not be good.
Linear Mode
