I have a new one, that was apparently a little bit different than the ones I had researched. I followed some advice, from a website called “always on liberty“ and made the door next to the dump / plumbing bay functional. There were already hinges on it, it just needed some small latches installed.
With that door open, I used a hacksaw about 6 inches up from the bottom on the right hand, metal flange, I bent that flange in about 25°, and was able to get the hose storage tube in there successfully and mount the storage tube to that metal flange.
There were various places to mount the other side of it underneath, that part was easy.
I am going to try and post pictures but I have never done that on this forum so if it does not work, you can email me directly and I will send them to you at
[email protected]