Quote:
Originally Posted by Rodney T
Dan L...I can't beleive I didn't have my head in that position...I actually SEE IT :-) seing is all I could possibly do as I see now way with out cutting torch to get at it and change it
Thanks a million as that switch seems to be functiong I am looking at the big possibility of a failed pump motor..
|
you are welcome.
make sure that the wire is still attached to the switch. if it is not, the dash light will stay on and the hwh system will not work.
i can reach my switch by opening the drivers door and kinda reaching under the dash from outside. i used a mirror last time to reattach the switch wire.
you can jumper the switch wire to ground, taking it out of the circuit for troubleshooting purposes. if the wire comes off of my switch again, i will probably jumper it to ground permanently. it is definitely a pita to reach.