2005 Minnie waste tank angle

[LdyPnx]

I am having a ton of issues connecting to my waste tank in my 2005 Minnie! It’s at a really bad angle, so connecting the hose itself, much less the Rhino Blaster” or even an angled clear elbow is nearly impossible. Am I missing something?

[creativepart]

Some times the hole is cut off kilter... or the plumbing is installed off kilter.

Buy a very short (24" long) flexible hose that you can install on the dump pipe and bend easily through the opening. Then connect your Rhino Blaster to the end of the short hose sticking out through the opening.

Something like this - or one that's smaller. The alternative is to have a new opening and cover installed:

https://www.amazon.com/Camco-39855-R.../dp/B06XGTZ5QS

[LdyPnx]

Thank you! But, I don’t even see a hole!?

[creativepart]

OK, perhaps we don't really know what RV you have. You said you have a 2005 Minnie. And, I guessed it's really a Minnie Winnie Class C motorhome. Because when I search 2005 Minnie that what I get. Is that correct?

If that's so, then there is a screw off plate on the bottom of your Wet Locker that reveals the hole for the dump hose.

If that's not the RV you have, you'll need to get back to us with the EXACT model info.

Here's a photo from the 2005 Minnie Winnie Operator's Manual:

[LdyPnx]

I didn’t know there was a hole there! That makes sense! Thank you both!

Originally Posted by creativepart

OK, perhaps we don't really know what RV you have. You said you have a 2005 Minnie. And, I guessed it's really a Minnie Winnie Class C motorhome. Because when I search 2005 Minnie that what I get. Is that correct?

If that's so, then there is a screw off plate on the bottom of your Wet Locker that reveals the hole for the dump hose.

If that's not the RV you have, you'll need to get back to us with the EXACT model info.

Here's a photo from the 2005 Minnie Winnie Operator's Manual: