You got it! This is what I replaced all mine with. It's a pain in the tail and you may recite a few 4-letter words, but the marker lights will come out through the original hole. I did find that if the light pushed into the wall cavity you'll need to take an exacto-knife razor and cut the old gromet off the light before you try to pull it back through and out. Once I figured the first one out (that was pushed back in), the rest were a piece of cake.
Given the dry rot and that the rubber is likely from China, I plan on putting these on my annual inspection list.
__________________
Gunny,
2022 Micro Minnie 1708FB
|