Hydraulic Landing gear problem..

[Gordy]

Have a 2005 Adventure, 32 foot. Need advice on how to replace hydraulic solenoid on HWH system. Tried to attach picture..

[imnprsd]

Since no one has replied, you might search for this fix on IRV2.com . I know you will find it there, because I have read about it before.

[58Ford]

Unplug the wires (connector) and unscrew the whole body from the manifold. Some fluid may come out. Pretty basic unless its stuck on - if so use a flexible oil/filter strap around the body for the extra leverage. The replacement should have the new "lever" for releasing instead of the old 1/4" nut. I have the same year and model - just the 33v. Ive been learning a lot about the hydraulics unfortunately!



Ive also found that entering "05 Winnebago adventurer solenoid replacement" in google will pull all the different forum posts.

[jerichorick]

Originally Posted by Gordy

Have a 2005 Adventure, 32 foot. Need advice on how to replace hydraulic solenoid on HWH system. Tried to attach picture..

Do you have the new solenoid?
The pressure MUST be off the system; all jacks up and slides in. I use water pump pliers to turn the solenoid. I have had to remove the adjacent one to gain access to the trouble one. Mark the connector locations. Use caution with the leads. Do not twist them or they may break off the solenoid. If you have to remove a good unit, check the tower for tightness. If it comes loose when removing the unit, getting the correct adjustment may be impossible.
HWH Replacement Parts - Stuart's Services These folks have always been great in guiding me and their pricing and shipping to are very good.