Quote:
Originally Posted by JoKeMa3
We got our Winnebago intent 30R today. We are driving home from Rockford to Denver. And we have stopped for the night. When we turn on the inverter it doesn’t seem anything is powered. And we realize that driving down the highway the refrigerator was not on.
This is our first RV. And we’re not sure if we’ve done something wrong or if something is wrong. The Manuel seem to be more of an explanation of what everything is then any “how to” reference. We actually took videos on our introduction to our vehicle. No where do we have instructions that say something has to be done in order for basic things to run off of it or what basic things run off the inverter when it’s active.
We would be grateful for any guidance
Thanks!
|
Welcome to Club INTENT.
We have found that the inverter in the INTENT should only be turned on by itself.
If using the generator or plugging in to shore power, turn off the inverter.
You might as well leave the screws out of the floor panel, because you’ll probably trip it again.
I recommend reading through this entire thread in your spare time, and make notes of the post #’s that interest you. There’s a TON of information here.
PM me your address and I’ll send you a refrigerator latch.
-Robb
Threaded Mode
