Slide Seal Replacement 2019 Adventurer 27N

[Oakprk]

A couple of the seals mounted at the openings of the slideouts are damaged and I can't find the part numbers on the online parts list. I'm also curious about the removal and installation process for the seals.

Photo attached.

Thanks

[be happy]

For folks to help more information is needed as for make,model and year of your rig.

I know you said you looked at the on line parts list. Did you try this one.
https://winnebago.com/owners/owner-resources

winnebago lists every nut bolt etc. You also might try Lichtsinn as they are the go to place for everything winnebago.

https://www.lichtsinn.com/

Lastly you might give Steel Rubber a look see.

https://www.steelerubber.com/camper-rv

[Oakprk]

Thanks for the response. My info is in my profile but my signature is not showing up!
2019 Adventurer 27N
The Winnebago link takes me to the on-line Parts list where I got 177503-09-CHT, TRIM-INTERIOR, SLIDEOUT which leads me nowhere! Steelrubber has some that look like it but I have to measure mine.
Thanks again!

[Blastvalve]

I too would contact Lichtsinn, they are pretty good at running parts down, especially if you have the original part #.

https://www.lichtsinn.com/

I dropped the part # into their online part finder and it came back no match. I had a similar instance and it was just due to Winnie having updated the part # from my build to now, Lichtsinn had no problem finding.

I’ve purchased from them many times, very helpful and reasonably priced. Given their location 1 mile from the factory if they don’t have it they can get it quick.

Good luck!

[wahoonc]

Originally Posted by Oakprk

Thanks for the response. My info is in my profile but my signature is not showing up! ~snip~

Apparently, there is a quirk in the software, if you post from a cellphone it doesn't pick up your signature for some reason. I have had this problem with both Android and iPhones.

Aaron

[powercat_ras]

Lichsinn sells the exact replacement for the slide seal wipers and bulb parts that Winnebago uses OEM, by the foot. I used them to replace deteriorated slide seals on my 2015 27N. The cost was quite reasonable, well under $ 100.

Lonnie in their parts department will have no trouble finding what you need and giving you a price and taking your order for quick shipment.

I got the Steele catalog at the Tampa Supershow and was considering using them rather than buying thru Lichtsinn, but nothing in the catalog seemed to be a perfect match for the Winnebago OEM ones I needed.

[Ray,IN]

I will add; take before pictures JIC you get interrupted and have to stop in the process. Pay attention to how the corners are made with the old seals, copy that installation.
I hired seals replaced on a 5er; the shop did not install the new seals like the old ones and they always gave me trouble, with water leaks. It was a constant battle I never solved.