I've not heard of any Winnebago installed hotspot and doubt that they have done so.
Ford can do that and it could be hardwired into your vehicle or a simple ORBII plug in unit. I would guess that info would be in your vehicle owner's manual packet - not the Winnebago manuals - the Ford manuals in the glove box or wherever those are on your chassis.
It's mostly a guess but this should work like any other ATT hotspot.
Quote:
Connect to your Hotspot on your phone or tablet or even laptop
Open a web browser on the phone or tablet (or laptop)
In a new blank brower tab, type http://attwifimanager/ or http://192.168.1.1 and press Enter.
You will be taken to the AT&T Router Login Page.
Enter the ADMIN password to continue. The default password for AT&T Routers is attadmin. (The password is case-sensitive)
Once you enter the correct password, you will be logged into the AT&T Router Settings page. You can manage all the settings of the router from there.
How to change the AT&T Router Wi-Fi Password and SSID?
All of the new routers come with Wi-Fi Network Name and Password pre-configured. For security reasons, all of you are advised to change the Wi-Fi network SSID and Password as soon as possible to make sure that your router is protected. If you are a newbie who doesn’t know how to change the password then you have come to the right place.
You can change the SSID and password of your Wi-Fi network in just a few moments and below is detailed guidance on how you can do so:
Change Wi-Fi Network Password:
Here is how you can change the Wi-Fi Password on AT&T Routers:
Log into the ADMIN AT&T Router Settings. The method is mentioned above.
Once logged in, you will be on the home page. Now, go to Settings > Wi-Fi from the left-side menu.
In the Main Wi-Fi Network section, find the WiFi Password field.
In the Wi-Fi password field, type the new Wi-Fi Password.
Click on Apply.
The Wi-Fi Password will be changed and you will have to reconnect to the WiFi network from all the previously connected devices.
Change Wi-Fi Network Name/SSID:
Here is how you can change the Wi-Fi Network Name/SSID on AT&T Routers:
Log into the ADMIN AT&T Router Settings using the aforementioned method.
You will land on the home screen of the router.
From the left menu, select Settings > Wi-Fi.
In the Main Wi-Fi Network section, find the Wi-Fi Network Name field.
Enter the new Wi-Fi Network Name in the given field.
Click on Apply.
The AT&T Wi-Fi Network will be changed and you will have to connect again from the previously connected devices as they will be disconnected from the network.
|
This is all based on a guestimate of how yours is likely to work. NO GUARANTEES. Let us know if this works for you.
Here's what the ATT Admin Login page will look like: