Remove Bedroom TV in 2016 View 24J

[obingv]

The picture on TV at the foot of the bed in our 2016 Winnebago View 24J is so bad you cannot see it unless you are in the middle of the bed. I have found a replacement TV at Best Buy, a 24" Insignia N10 model for only$59.95.It has the co-ax antenna/cable input and the A/V RCA jack inputs required. It is a 110 volt model, so I bought a Bestek 150 watt inverter on Amazon, all set to do the replacement. The problem is how do I get the existing TV off the mount so I can mount the new one. I cannot seem to find a way to get the TV off the wall except for removing the entire mounting frame which is a tedious proposition. Any help or ideas out there?

[Morich]

Possible it has angled bracket attached to the wall, then a second metal to the TV back to hang with hooks down on the first? That second screwed with two screws at the bottom to keep it from bottom going forward and then unhook from top?
Pictures can make more sense if this is what you have!!
Snips from this parts catalog:
https://catalog3d.winnebagoind.com/menu/Parts.htm under TV wiring!

Click for better view!



Red is wall bracket, blue attached to TV and remove screws to swing bottom forward and then lift up to remove?

See it that fits what you have?
But there are two builds for that year, early and late and I did not check the other!

[Morich]

As a second thought? Any chance the TV there already is wired through the inverter?
Or perhaps that was not an option on your RV?
Just a thought as I'm finding this in the drawings that might save some trouble?

[Ontario Don]

Richard has got it!

Our '21 View TV was secured with that bracket. Our bracket had only one screw at the bottom. Once that retaining screw was out, the TV and mount just lifted off.

Cheers,

[obingv]

Thank you for responding. I should have realized the since the screws were the only removable thing on the mount it was the way to get the TV off the mount.