Awning issues
The awning on our 2019 View does not roll up neatly when retracted. It initially lays flat against the roller but at about the half way point it starts to develop a wave at each end. It hasn't created too much of a bunch so that the shield can't cover it when full retracted, but it concerns me. It appears that the awning fabric is not aligned closely enough at the fabric mounting points on the roller, shield and RV mounting rail.
Anyone tried to adjust their awning fabric. I replaced the shorter slide covers on my first class C RV without too much problem, but this awning is about 19' long and is difficult to move. The mounting on the roller appears to be in two slots while on the RV end there are only one slot for the shield and RV rail, so I imagine that's the easiest place to try to adjust the fabric position.
I have upgraded the awning system with one of Carefree's BT12 kits, but that is not the issue. The awning was doing this prior to the upgrade. Both arms are also adjusted to the same position.
Any thoughts?
__________________
LAT-LON
2019 Winnebago View 24V, Hellweg Sway bar, Roadmaster Sterling Tow bar
2018 Wrangler Sahara 2Dr.
|