I think I found a picture of the bed set up. When the bed comes down you have to fold the backs of the seat down and the bed rests on them. If that's correct how much room do you have between the bed frame and the back of the chair?
I would come up with either wood or square metal tubing (make both look good) attach about mid bed. This would have to cover the width of the plywood to work. Bolt through the frame of the bed, I think for your application steel tubing would work better. The down side is when the bed is down the brace installed will dent the backs of the chairs. Hope this helps or at least gives you some ideas
__________________
07 Meridian 36G
Roadmaster tow dolly
Great Wife!! & Max the Frisbee chasing dog.
|