Video about the new 2023 Minnie 2529RG

travelkids · 10-30-2022, 10:03 AM

Here is a link to a video of the 2023 2529RG. No info on MSRP.

Bad news is that my wife really likes it.

https://www.youtube.com/watch?v=6REAgb3n_Ak

RovingMedics · 11-02-2022, 07:51 PM

I noticed that there's a vent fan over the stove. That's a nice addition especially with the way that I can burn some bacon.

No1Hunter · 11-08-2022, 06:56 PM

Quote:

Originally Posted by RovingMedics

I noticed that there's a vent fan over the stove. That's a nice addition especially with the way that I can burn some bacon.

My 2022 has a fan over the stove.

On a side note - I like the cabinets over the bed rather than that floating shelf! Overall, the only thing I like better is the 50 amp power.

BennieD · 04-21-2024, 08:21 AM

Wish mine was 50 amp. I have bedroom AC and can’t run both at same time without kicking breaker

CrispyBones · 04-21-2024, 08:52 AM

I recently installed 2 soft startup devices on mine. We'll see how what effect that has on power draw. I will say that I'm able to run the AC directly from a 15-amp outlet at home without tripping the breaker which I was unable to do to before.

BennieD · 04-21-2024, 11:48 AM

Let me know how that works and a link to what you installed

travelkids · 04-22-2024, 06:22 AM

What brand softstarts did you install?

CrispyBones · 04-22-2024, 06:40 AM

I ended up going with StartUp RV. They're much smaller now and easily fit inside the cooling unit. $249 each.

travelkids · 04-22-2024, 07:10 AM

CrispyBones, I’m assuming you did the install yourself. Was / is it a plug and play installation? No special tools or knowledge required?

CrispyBones · 04-22-2024, 08:43 AM

I did the install myself. Pretty simple actually. All connectors and even a wire cutting and crimping tool were provided with the kit. Installation instructions can be printed off their website. For my Dometic A/C's there were only 6 steps to follow. They do provide support if you should experience any trouble. By that I mean they'll get on a phone call with you and walk you through it step-by-step. No charge. If you do go with this device I would recommend using your own cutting and crimping tool. The one they provide is pretty cheap.

https://www.softstartrv.com/