Some batteries are equipped with a built-in I/O switch which will disconnect all loads and all incoming power as well. A simple solution to disconnect the battery from all loads, including parasitic loads is to install an 250 amp ANL fuse between positive battery terminal and any load bus. When you want power off, you can just remove the ANL fuse, or install a disconnect in front of it. You can then still charge the battery with solar by bypassing the ANL fuse and flipping on your pv manual reset breaker.
__________________
Jim. Former, 2021b Micro Minnie 2108DS
Medically grounded, but still lurking the Micro Minnie Discussions
|