Shoreline power wont work on Sunova 35J

[FamilyBus]

I can start the generator but the poweline controll center does not light and I have no power to the RIG - I have checked all the breakers Any suggestions

[FamilyBus]

I can start the generator but the poweline controll center does not light and I have no power to the RIG - I have checked all the breakers Any suggestions

[Clay L]

On that model you may have to plug the generator into a plug in the service bay. I don't think it has an automatic transfer switch.

[peter griffin]

when you say all breakers...do you mean the breakers on the generator and inside?

if you dont have the auto trnsfer i would get one...you should be able to get it & installed for under 300.00..

good luck

[shastaron]

Do you have interior 110 when you connect your shoreline to a 110 source?

Is this a new problem? Has it worked in the past? I think on your unit it has to be plugged into the plug in the service bay. If it worked in the past it may have worked loose.

[NeilV]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by FamilyBus:
I can start the generator but the poweline controll center does not light and I have no power to the RIG - I have checked all the breakers Any suggestions </div></BLOCKQUOTE>

Make sure that the two breakers on the generator itself are not tripped.

Other then that the transfer switch could be defective however that is a fairly new model, the Sunova came out in 2002 and the 35J is new for 2007 if I am reading the Winnie web site correctly. Did you call the dealer and if so what did he say?

[FamilyBus]

Thanks All - I found another breaker on the generator That did the trick