Hey All
Got tired of the house battery switch accidentally getting turned off. The switches are on a panel located in the step well coming into the coach.
This usually happens while we're traveling for the day. When we stop for the day I get everything hooked up then no power. And duh I look at everything BUT the dang switch for 20 minutes.
So I decided to see if I could move the panel and here's what I came up with.
The first pic shows the hole where the panel was located.
I pulled the paneling off the wall and I was able to feed the harness with all the switch connectors up through the floor and over to the new location.
There are two sets of wires on the harness that are capped off as you can see here. Anyone have an Idea what those could be used for?
While I had the paneling off the wall I tapped into the porch light and ran lights down to the outdoor grab handle and put lights in it.
We decided to change the look of the paneled wall since I kinda tore up the seam tape between the two pieces. Went with some vinyl stick on tile. And since I now know where there is some solid wood behind the wall I put up 3 coat hooks.