It's one of those small points to learn how to get the most out of the forum but the online drawings are a good place to begin to sort electrical questions. since electrical is one of the things which changes the most often, getting the right info can be critical.
And those are filed by going to year, then model, make and floorplan. Even sometimes needing to know if it is an early or late year build! The 7th digit of the serial number (not VIN) will be 1 for early and 2 for late year build.
That leaves us to only be able to point you to the listing!
https://www.winnebago.com/Files/File...ram/Wiring.htm
Once there you can choose how you want the info displayed. The installation section will give you more of what you see in real world, while the diagram gives the path in closer to the "normal" electrical schematic.
I do a lot of looking at the drawings as that is where former training makes me feel at home and there are lots of small quirks to each set of drawings, so if this is not something you feel good doing, I'm open to help.
No need to bang our heads and fight to learn a new way of walking if we can get help online!
First thought might be that the power ped needs to be verified or possibly the transfer switch?
Path should be pole to cord to transfer switch and then to load center. Sounds like you may have a 50 amp RV? That should let you find 110 AC on two different hot wires to the RV? But that begins to get over into guessing, not sure ideas!
Let us know how we can best help?
By the way? Welcome to the group and hope you find some good info!