Onan Energy Command 30 Auto Starts when connected to Shore Power

[IRestore]

2008 Winnebago Itasca Horizon 40 KD
8,000-Watt Onan Quiet Diesel

This is my 1st Post on this forum.

Onan Energy Command 30 Auto Starts even when connected to Shore Power.


Onan Energy Command 30 Information
Safety is set to Ignition
HVAC Run Request tested fine with Basement A/C.
Tested for Shore AC power and it shows it is working.

When plugged into 50 Amps and the Onan Energy Command 30 is set to Auto Start it starts up the generator when the A/C Thermostat is turned on. Temperature inside is 97 Degrees, outside temp is 113 degrees.

When the Onan Energy Command 30 is set to Maunal, the A/C kicks on using Shore Power.

I checked all the breakers & they are on & seem tight.

I tried to search online & have read everything I could find remotely related. I tried to provide all the information that I thought you might need, but if I left something out, please let me know.

Any help is appreciated.