Need some help with my 2022 Micro Minnie FLX 2100BH

[Hamers]

Hello everyone!

Been mostly enjoying my 2022 micro mini flx 2100bh. But today I tried to turn on the xantrex system to power up the 120 and it tries to work but ends up just making a clicking noise in the breaker / fuse box. It sounds like a relay kicking on and off over and over until I shut it off. The power to the 120 is also on and off with the clicking noise as the microwave is beeping on and off. I pulled the cover and looked and felt around and I think I feel the click in a little blue box shown in the pics. Can anyone help with this issue? Thanks so much!!

[mfouts]

May i ask what a 120 is?

[Hamers]

Yes the 120 as in the 120 power for the outlets a/c microwave an all that. Thanks !

[mfouts]

You might try changing the setting within the Xantrex app from 30 amp service to 15 amp or whatever would be appropriate for the 120 power.

[mfouts]

Also if you haven't read through this thread it helped me understand a bit more about the flx model.
https://www.winnieowners.com/forums/...rs-363804.html

[Gtekeepr]

mfouts is correct, go into your Xantrex app and try setting this to 15.0A and see what happens.

[Hamers]

Hey thank you guys for the responses. It's great to have a community to ask. I ended up figuring it out though. It's the power save setting in the xantrex app. I turned it off and now it's acting as it should. Thanks again!!