How to wire up a Xantrex XM1000 Pro Series Inverter?

[Navion 24J]

I have a 2013 Navion 24J. I'm in the process of replacing the Xantrex XM1000 Pro series Inverter. The original XM1000 had been removed which had the readout inside on the wall next to the other monitors. I have looked at the PDF on line which only shows the obvious exterior wiring (+ and - post). What about the wiring that goes to the inside connectors? Any help would be appreciated, Thanks

[Navion 24J]

You can see the two cables feeding through the front of unit! Don't know what they hook to inside the unit! Thanks

[Navion 24J]

pics

[Navion 24J]

I found these wiring pics, still not sure about where the wiring goes!

[Todd157k]

On my unit (different unit, but same inverter), the two AC lines on top go to two different wall outlets. One for the tv, and another in the front cabinet for TV accessories (ant, and dvd etc). The white cable going to the white cover plate are the wires to the controller. It's just an on/off and voltage reading display inside.
The AC receptacle on the front is in addition to the other lines for hooking up stuff outside. (low power lights, etc)

[grtharris]

Navion 24J, here is the link to the manual. Note the unit is mounted upside down in your coach.
http://www.xantrex.com/documents/Pow...ork)%20(1).pdf

[Navion 24J]

Thanks for the information, I got it figured out last night! Have a great day