Quote:
Originally Posted by mfouts
I believe if possible your bottom bolt needs to be in next hole up. That will limit pivot and straighten chain out a bit. I've been on 4 trips now maybe 2000 miles or more and nothing like that. I am running about the same set up as you. I notice you tension nuts are not the same and I think they should be. Before you weld anything make sure you set up is correct.
|
I just posted those for a look at the bracket, threads showing is off as I’ve moved the chains around a bit.
I agree that the bolt should go one hole higher, the problem is it won’t. There is just barely not enough clearance for a bolt to go through, the frame is covering it slightly, in other words. That was part of my frustration with buying it because it seems like brackets aren’t the correct size. Honestly I couldn’t really decipher the sizing instructions from Anderson anyway.