Originally Posted by LJ33mw
Need suggestions please, recently purchased a 1999 Minnie Winnie and turned on the heater for the first time and about froze sleeping on the sofa. There is a register on the floor at the dining seat but no heat comes out, it has plenty of heat coming out of ducts in the back. Where is the furnace located and how do I get heat for the galley area?
If you’re getting heat elsewhere, my guess would be that one register has become disconnected. I’d start at the register itself, unscrew it, gently pull it out and see if it’s connected to the tubing that supplies heat. If it’s fine, only then would I look at the connection at the heater, but it’s probably one or the other. And no, without looking on Winnebago’s site, I wouldn’t know off the top of my head where your heater is located, but if you walk around outside, and find the exhaust, it’s most likely on the other side of that wall.
But check out the online diagrams of your rig if the register is connected.