Adjust rear camera angle in 2921 Minnie Winnie

[Jim Reed]

I would like to raise the camera direction to see farther behind the rig, as we do not have a toad. None of my screw driver heads fit the six apparently hex head fasteners on the camera. Has anyone done this and can advise me how to do it? When we got our 2021 unit the camera picture was reversed -- the screen menu allows this to be changed, thank goodness.

[akeagle]

Originally Posted by Jim Reed

I would like to raise the camera direction to see farther behind the rig, as we do not have a toad. None of my screw driver heads fit the six apparently hex head fasteners on the camera. Has anyone done this and can advise me how to do it? When we got our 2021 unit the camera picture was reversed -- the screen menu allows this to be changed, thank goodness.

Might be metric or torx (star drive).

[Winterbagoal]

Originally Posted by Jim Reed

I would like to raise the camera direction to see farther behind the rig, as we do not have a toad. None of my screw driver heads fit the six apparently hex head fasteners on the camera. Has anyone done this and can advise me how to do it? When we got our 2021 unit the camera picture was reversed -- the screen menu allows this to be changed, thank goodness.

Go to the dollar store and get a set of allen wrenches/keys. They fit the 6 bolts on the camera. Then get up the ladder, loosen the bolts, and adjust it.
My camera wouldn't aim much farther behind the rig, on my 2018 Navion. Probably the same camera setup.