I have a 2018 Vista LX 30T that is xm ready. I bought the module to put in to the Radio, does anyone know how to take the Radio out. I don't know if it is just held in with clips and will pop out with a little pressure or if it is screwed in some how. Just looking for a little advice so I don't break anything.
The big plastic surround (Bezel) is held in by a few clips. Use a plastic tool and carefully start prying out one corner and work your way around. Once removed you'll find four Torx screws holding in the radio.
If you are not sure there are videos on youTube.. It is really easy.
2011 Itasca Rey 25Q
One of the "Quiet Professionals". Lifetime HSUS member and supporter.