Engine/House Radio Switch
Hi all. This my my first post on this forum. Glad to have found y'all.
My the dashboard radio on my MinnieWinnie 24F works fine when the Engine/House power switch selection is set to Engine, and the ignition is in the ON position. It does NOT work when the switch is set to House power.
I removed the DPDT switch & verified with Ohmmeter that it's doing as expected (Center poles connected to top poles in one position, and bottom poles in the other). On the connector that the switch plugs into, I see 12V on the bottom 2 poles when the ignition switch is OFF. I suspect that this is House power. I don't see any power on the top 2 poles, which I assume is Engine power.
When I switch the key to the ON position, I still don't see any power on the top 2 poles, but power goes off on the bottom 2 poles.
I've checked all the "obvious" fuses, & found no bad ones. Anyone have any ideas, or a wiring diagram that shows how engine power gets to the Engine/House switch? Thanks.
|