I have installed “Ready Brake,” and I’m installing the dash light that indicates when the brake is activated. I have the wire run from the back to the area in front of the radiator, but I can’t find a way to get it into the dash. Please shed some light on this for me.
The way I've done it is to locate a wire bundle that passes through a rubber seal in the firewall. Then use something pointed to create a hole in the rubber seal then use a straightened coat hanger to attach the wire to and poke it through the hole you created in the seal.
__________________
Scott and Martha Baker Julian, CA
2016 Sunstar LX 27N, 2016 Ford Fiesta as Toad
The way I've done it is to locate a wire bundle that passes through a rubber seal in the firewall. Then use something pointed to create a hole in the rubber seal then use a straightened coat hanger to attach the wire to and poke it through the hole you created in the seal.
That was the ticket! I got it, and everything is working as it should. Thanks again.