|
05-26-2008, 02:19 PM
|
#1
|
Winnebago Owner
Join Date: Jul 2003
Posts: 185
|
I have a spot in my bathroom where the vinyl flooring is buckling slightly and becoming unglued.
I've tried to hammer it down and it will stay in place for a few days but then seems to come unglued again.
I guess the solution is to pull it up a little more and put some better glue under it.
Has anybody run into this situation and what did you do?
Thanks.
|
|
|
05-26-2008, 02:19 PM
|
#2
|
Winnebago Owner
Join Date: Jul 2003
Posts: 185
|
I have a spot in my bathroom where the vinyl flooring is buckling slightly and becoming unglued.
I've tried to hammer it down and it will stay in place for a few days but then seems to come unglued again.
I guess the solution is to pull it up a little more and put some better glue under it.
Has anybody run into this situation and what did you do?
Thanks.
|
|
|
05-26-2008, 02:53 PM
|
#3
|
Winnebago Owner
Join Date: Dec 2006
Location: Indianapolis Indiana
Posts: 124
|
I've got a similar problem in my kitchen, I took a pastry roller and rolled the "bubble" to the edge and tried gluing it. But it hasn't helped. It seems worse when it it is colder and better when things are warm. If folks have any, I'm interested in other solutions.
__________________
2007 Itasca Sunrise 35L W22 Chassis TigerTrak ScanGaugeII
Blue Ox tow bar - Brake Buddy
2013 Equinox
|
|
|
05-26-2008, 03:34 PM
|
#4
|
Winnebago Master
Join Date: Nov 2005
Posts: 1,520
|
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by scirocco22:
I have a spot in my bathroom where the vinyl flooring is buckling slightly and becoming unglued.
I've tried to hammer it down and it will stay in place for a few days but then seems to come unglued again.
I guess the solution is to pull it up a little more and put some better glue under it.
Has anybody run into this situation and what did you do?
Thanks. </div></BLOCKQUOTE>
In a home or apartment I would normally us a wet cloth and a steam iron to soften the old adhesive and get the vinyl back down however the subfloor in an RV is 1/8 to 1/4 inch thick luan over a 1 inch thick foam core and you could delaminate the luan from the foam with too much pounding or heat.
If it is just a real small spot in the vinyl and not the subfloor then slit the bubble and reglue and then put seam sealer (this is a most important part of the repair) over the slit to prevent water etc from getting into the repair. If it is close to a corner or a large area then peal it back to the corner/wall and reglue.
The materials to do this should be available at any good vinyl flooring dealer.
__________________
Neil V
2001 Winnebago Adventurer WFG35U
|
|
|
05-27-2008, 04:03 AM
|
#5
|
Registered User
Join Date: Jun 2005
Posts: 729
|
Winnebago doesn't glue the vinyl flooring down. It's only stapled at the edges.
|
|
|
05-27-2008, 04:54 AM
|
#6
|
Winnebago Owner
Join Date: Jul 2003
Posts: 185
|
Thanks for the responses!
FrontRanger, there was some sticky stuff underneath where mine was popping out. I could see and feel it. Maybe it's glued at the seams and that's where it is coming up?
|
|
|
05-27-2008, 05:09 AM
|
#7
|
Winnebago Master
Join Date: Jun 2003
Location: Palisade CO
Posts: 895
|
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by NeilV:
In a home or apartment I would normally us a wet cloth and a steam iron to soften the old adhesive and get the vinyl back down however the subfloor in an RV is 1/8 to 1/4 inch thick luan over a 1 inch thick foam core and you could delaminate the luan from the foam with too much pounding or heat.
</div></BLOCKQUOTE>
If you check your floor vents you will find that there is regular plywood - at least 5/8 inch thick as I recall - over the foam.
__________________
Clay WA5NMR - Ex Snowbird - 1 year, Ex Full timer for 11 years - 2004 Winnebago Sightseer 35N Workhorse chassis. Honda Accord toad.
|
|
|
05-27-2008, 05:21 AM
|
#8
|
Winnebago Camper
Join Date: Dec 2006
Location: Ventura County, CA
Posts: 13
|
I had a similar problem in the dinette area with loose vinyl tiles. I tried to repair the area by placing something heavy on the tiles for a few days but the tiles came loose again. Had it repaired under warranty. The dealer said the vinyl tiles were not fitted and glued in correctly.
__________________
Bill & Mary Ann
2007 Itasca Meridian 34H
|
|
|
05-27-2008, 03:57 PM
|
#9
|
Winnebago Owner
Join Date: Mar 2007
Location: Cumming, GA
Posts: 80
|
We had the same problem in front of the shower and had it fixed under warranty a few months back. It is now coming loose again and the DW is fed up and wants to install some other flooring (maybe wood?). Any ideas?
__________________
Carroll and Leslie White
Retired Navy (ETCS/SW/AW)
|
|
|
05-28-2008, 01:41 AM
|
#10
|
Winnebago Master
Join Date: Jul 2003
Location: Seaford, VA
Posts: 1,046
|
On a 03 39QD, the tile at the bottom of the one place wall kept coming loose. Do NOT depend on the original glue, use regular tile cement.
The wall was finally resecured and the trim reinstalled and that seemed to take care of the problem. See if the buckeling is near a moving or vibrating section. Good Miles
__________________
Happy Trails! ICHN2GO, Seaford VA,
06, 34 Newmar Ventana
02 Jeep Liberty
|
|
|
05-28-2008, 03:56 AM
|
#11
|
Registered User
Join Date: Jun 2005
Posts: 729
|
Not sure if you are talking about vinyl flooring or vinyl tile.
Winnebago doesn't glue down vinyl flooring, but does use the peel and stick vinyl tile.
If you are having bubbling problems with vinyl flooring, you need to drill a VERY SMALL hole and inject some glue and then place heavy books on it.
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
All times are GMT -6. The time now is 05:19 AM.