Quote:
Originally Posted by Kaputnick
Has anyone experienced a problem with the gauges all dropping to zero readings and then returning to normal? The sequence is that the seat belt warning sounds and the all the gauges go dead.
Within seconds the gauges return to normal sometimes the fuel and temperature are slower than the tachometer and speedometer. The last few times only the fuel and temperature have failed with the same seat belt warning light and alarm.
Any known recalls on this issue or ideas from the group. Our 2006 Itaska Suncrusier has only 8,000 miles on it; possible computer module issue?
Thanx!
|
Assuming you have the Workhorse chassis, YES this is a common problem. Almost all of us have had it happen multiple times. The good news is that it is a harmless "reset" of the cluster believed to be caused by a data overload. Others believe it indicates a poor ground or connection in the two harnesses plug into the back of the cluster, but either way it is not something you should worry about, IMO. There was no recall or fix even when WCC was still alive. You can learn a lot more about your chassis in the Workhorse chassis forum here oniRV2.com.
Since your 06 has so few miles on it, do you know if the Bosch Brake recall applied to yours or if it was completed?