|
01-16-2005, 05:06 PM
|
#1
|
Winnebago Camper
Join Date: Jan 2000
Location: Winter Springs FL
Posts: 29
|
Anyone ever have a bay door latch break?
This past weekend I went to open the water/sewer door and NO GO. The FL Boomers gathered around and were scratching our heads as DriVer rode up on his bike to save the day.
He inserted a screwdriver between the door on the side by the rear wheel well and was able to unscrew the latch assembly. The did the same on the other side. Obviously door would then open, but not latch.
Mike, DriVer, then undid the handle assembly to find a small nylon (plastic) part with a crack in it that move off to the side rather than up and down to pull the rods that release the latches. The nylon (plastic) piece is pop rivited together..... To drive home I "reinstalled" the latches and closed the door.
Spoke with Winnebago rep at the Tampa RV Super Show on Saturday....he, like the FL Boomers, scratched his head and suggested I replace the entire handle/latch assembly. Then have the handles painted to match the rest of the Motorhome. Now I can do that. but sure would like an alternative solution. Any suggestions??
By the way exact same thing is on the door directly opposite side where my Hurricane Heater system is?, which gets VERY little use. Strange.
__________________
Lou & Robin
|
|
|
01-16-2005, 05:06 PM
|
#2
|
Winnebago Camper
Join Date: Jan 2000
Location: Winter Springs FL
Posts: 29
|
Anyone ever have a bay door latch break?
This past weekend I went to open the water/sewer door and NO GO. The FL Boomers gathered around and were scratching our heads as DriVer rode up on his bike to save the day.
He inserted a screwdriver between the door on the side by the rear wheel well and was able to unscrew the latch assembly. The did the same on the other side. Obviously door would then open, but not latch.
Mike, DriVer, then undid the handle assembly to find a small nylon (plastic) part with a crack in it that move off to the side rather than up and down to pull the rods that release the latches. The nylon (plastic) piece is pop rivited together..... To drive home I "reinstalled" the latches and closed the door.
Spoke with Winnebago rep at the Tampa RV Super Show on Saturday....he, like the FL Boomers, scratched his head and suggested I replace the entire handle/latch assembly. Then have the handles painted to match the rest of the Motorhome. Now I can do that. but sure would like an alternative solution. Any suggestions??
By the way exact same thing is on the door directly opposite side where my Hurricane Heater system is?, which gets VERY little use. Strange.
__________________
Lou & Robin
|
|
|
01-17-2005, 02:21 AM
|
#3
|
Winnebago Camper
Join Date: May 2003
Location: Creola, AL
Posts: 17
|
The gas lift assist mechanisums are slowly going south on mine. I will have to replace them all within the next several years. I've heard of others with this problem.
__________________
Regards,
|
|
|
01-17-2005, 06:11 PM
|
#4
|
Winnie-Wise
Join Date: Aug 2002
Location: WHITING,NJ,USA
Posts: 470
|
Mine also became disabled just before leaving for Florida on the 27th of Dec. The white plastice striker would not go in to disengage the plate when the outside latch was pulled. Somehow the linkage that attaches to the outside handle and connects to the striker mechanism disconnected. I could not open the box, in trying to pop the latch back from the striker the latch broke. It was an easy fix for the local Winnie dealer. It took about 45 minutes. I got a schematic showing the linkage mechanism. It looks as if it can be fixed easy by anyone who is handy you will need 2 pop rivets to secure the plate.
__________________
07 Itasca Ellipse 40fd, 2014 Honda CRV, greyhound lab mix, pit pointer mix(RIP bessie) , shar pei mix, stupid cat, wife
|
|
|
01-18-2005, 04:03 PM
|
#5
|
Winnebago Camper
Join Date: Jan 2000
Location: Winter Springs FL
Posts: 29
|
Thanks GG1, appreciate the information.
__________________
Lou & Robin
|
|
|
01-23-2005, 05:10 PM
|
#6
|
Winnebago Watcher
Join Date: Aug 2002
Location: Concord, CA
Posts: 1
|
GG1. I had the same problem this weekend. White Plastic striker broke. Can you post the schematic. I want to see if I can fix it myself. Thanks
__________________
2014 Dutchstar 4038
|
|
|
01-24-2005, 04:59 PM
|
#7
|
Winnie-Wise
Join Date: Aug 2002
Location: WHITING,NJ,USA
Posts: 470
|
I cannot send you a copy as I am traveling in Florida and using a laptop, but any Winnebago dealer should be able to make you a copy
__________________
07 Itasca Ellipse 40fd, 2014 Honda CRV, greyhound lab mix, pit pointer mix(RIP bessie) , shar pei mix, stupid cat, wife
|
|
|
01-24-2005, 05:23 PM
|
#8
|
Member
Join Date: Jun 2001
Posts: 71
|
After reading all these posts, do any of you lube these doors. I TriFlo the mechanism and use a striker grease where they latch. My doors shut with a "slam." Have never had a problem?
|
|
|
01-24-2005, 05:56 PM
|
#9
|
iRV2 Marketing
Join Date: Jan 2000
Location: Conway, SC
Posts: 886
|
<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR>Originally posted by no18yes:
.. do any of you lube these doors. <HR></BLOCKQUOTE>Lou had just picked up his new motorhome and the slider in the latch was probably broken before he picked up the motorhome. It just picked a weird time to completely fail.
__________________
03 Adventurer 38G, Workhorse W22
F&R Track Bars, Safety+ , Ultrapower, Taylor Extremes, SGII
TST 507, Blue Ox, SMI, Koni FSD, CrossFire
RV/MH Hall of Fame - Lifetime Member
|
|
|
01-24-2005, 08:45 PM
|
#10
|
Member
Join Date: Jun 2001
Posts: 71
|
Gotcha
|
|
|
04-25-2005, 12:23 PM
|
#11
|
Winnebago Watcher
Join Date: Apr 2005
Location: nevada
Posts: 1
|
I just purchased an 03 freedom. Are you happy with yours. Have you had any problems with the Hurricane Heater. The previous owner spoke about a circuit board that was recalled and that other than that it was perfect. I would be interested in your take on it. We Love this Ultimate so far. Robert
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|