|
10-26-2011, 06:48 PM
|
#1
|
Winnebago Camper
Join Date: Aug 2011
Posts: 5
|
Basement Door supports
My entry level Winnebago uses hinged rods to hold open the basement doors below the slides. They are a real pain and I'd like to convert to another system. I'd like to hear from anyone who has converted to a piston style or any other form of upgrade.
|
|
|
10-26-2011, 07:40 PM
|
#2
|
Winnebago Master
Join Date: Sep 2004
Location: Glen Allen, VA
Posts: 2,169
|
Welcome to the forum. My rig already has the gas strut type of supports but I would think you could add them to your rig. They basically use a ball and socket type of connection.
Hang on and I am sure someone will chime in if they have done the conversion.
__________________
'07 Country Coach Allure 470 Siskiyou Summit #31578, Cummins ISL 425; 2014 Ford F150 toad; Air Force One Toad Brake.
Glen Allen, VA; Smith Mountain Lake, VA.
|
|
|
10-27-2011, 06:48 AM
|
#3
|
Winnebago Camper
Join Date: Mar 2011
Location: FT for 6 years, NW in the summer, S in winter.
Posts: 5
|
I have TWO large bay access doors that are under my one slide. They came with piston assist devices, two on both doors. I have just "removed" all 4 pistons. Why? Well, both doors were limited to opening no higher than just below the bottom of the slide to prevent damage if the slide was accidentally opened/closed while the doors were open. This arrangement required you to always get down on your hands and knees to access the bays, even when the slide was closed! A definite PITA. Now I have a dowel cut to the right length to prop the door open IF the slide is open......and the BIG improvement, I have another length of galvanized water pipe with a rubber crutch pad on one end to hold the doors wide open when the slide is closed.....this is a GREAT improvement!! Rook.
__________________
When you get a chance to dance, or sit this one out......I hope you DANCE!
98 National Tradewinds 7370, powered by a 3126B 300HP CAT Turbo, Freightliner XC chassis
|
|
|
10-27-2011, 07:09 AM
|
#4
|
Winnebago Camper
Join Date: Oct 2007
Location: South Jersey
Posts: 21
|
Quote:
Originally Posted by Rook
I have TWO large bay access doors that are under my one slide. They came with piston assist devices, two on both doors. I have just "removed" all 4 pistons. Why? Well, both doors were limited to opening no higher than just below the bottom of the slide to prevent damage if the slide was accidentally opened/closed while the doors were open. This arrangement required you to always get down on your hands and knees to access the bays, even when the slide was closed! A definite PITA. Rook.
|
We also have 2 bays under both slides. The struts on our unit are two position struts. First pull opens 90 degrees, then second lift opens an additional 70 degrees. This way I can open bays with slide out and not hit the slide but if the slide is in I can open them fully.
__________________
Kathy & George Zimm & 1 Sheltie, Lancelot
Mickleton, NJ
2006 Coachman Epic & 2013 Chevy Equinox Toad
|
|
|
10-28-2011, 03:40 PM
|
#5
|
Winnebago Watcher
Join Date: Oct 2011
Location: Foley AL
Posts: 4
|
HatchLift after market lift kit
The newest (Dec 2011) edition of MotorHome has an article on page 58 titled "Hold It Up" that shows an after market kit named "HatchLift" in the $32-$42 range. It looks pretty good and I may try a couple on my 2012 Winnebago Vista 35F.
|
|
|
10-29-2011, 12:05 PM
|
#6
|
Winnebago Camper
Join Date: Aug 2011
Posts: 5
|
ETnRvr - thanks for the reply. I don't think my copy has come yet, but I'll definitely check it out. My RV is a 2011 35F, so if it works, it should work for both of us.
I really like the thought of a two stage system that George Z mentions - it sounds perfect.
The other option I'm considering w/ or w/o a better door support is a slide out tray for the under-slide compartment that has the heaviest items in it so my old back has it a bit easier.
Thanks to all who have replied and if anyone has yet to respond but has a good solution, bring it on.
|
|
|
11-06-2011, 02:52 PM
|
#8
|
Winnebago Owner
Join Date: Oct 2008
Location: Marshfield, WI
Posts: 88
|
Quote:
Originally Posted by Rook
I have TWO large bay access doors that are under my one slide. They came with piston assist devices, two on both doors. I have just "removed" all 4 pistons. Why? Well, both doors were limited to opening no higher than just below the bottom of the slide to prevent damage if the slide was accidentally opened/closed while the doors were open. This arrangement required you to always get down on your hands and knees to access the bays, even when the slide was closed! A definite PITA. Now I have a dowel cut to the right length to prop the door open IF the slide is open......and the BIG improvement, I have another length of galvanized water pipe with a rubber crutch pad on one end to hold the doors wide open when the slide is closed.....this is a GREAT improvement!! Rook.
|
I like the idea of 2 position struts, but I think my method works almost as well and is a LOT cheaper. The original cable was Winnebago's idea, I just improved on it by making the cable loop bigger so it will slip over the screw easily and allow the door to open higher. If I need to keep it under the slide, then I loop the cable back on the screw as shown in the picture.
__________________
Denny, Connie & Shadow (former barn cat made good)
2000 Itasca Horizon, Cat 3126B, Freightliner Chassis
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|