|
|
06-10-2015, 10:54 PM
|
#61
|
Winnebago Watcher
Join Date: May 2015
Posts: 2
|
I already checked these pages and site. There is no ECM wiring diagram.
|
|
|
06-10-2015, 11:11 PM
|
#62
|
Winnebago Camper
Join Date: Aug 2012
Location: Horse Country, FL
Posts: 19
|
Quote:
Originally Posted by Freebird1958
I have Windows 8.1 on my laptop. I try to open the 3D viewer with no luck can anyone help me on this problem.
|
I have the same problem. Any help out there? I was told to call Winnebago IT for support, but haven't done so yet. I'm hoping to see someone face-to-face at the GNR this summer.
__________________
Thom
2012 Itasca Meridian 36M
2012 Jeep Wrangler
|
|
|
06-14-2015, 01:17 AM
|
#63
|
Winnebago Owner
Join Date: Nov 2014
Location: Nomadic - Currently Near Lassen NF
Posts: 218
|
Quote:
Originally Posted by Freebird1958
I have Windows 8.1 on my laptop. I try to open the 3D viewer with no luck can anyone help me on this problem.
|
Quote:
Originally Posted by NukeRef
I have the same problem. Any help out there? I was told to call Winnebago IT for support, but haven't done so yet. I'm hoping to see someone face-to-face at the GNR this summer.
|
Do you meet the system requirements? Make not that you must have MS IE 32 bit version:
Software
Operating systems supported:
o Microsoft Windows XP Service Pack 3 (SP3) (32-bit)
o Microsoft Windows Vista Service Pack 2 (SP2) (32-bit, 64-bit)
o Microsoft Windows 7 (32-bit, 64-bit)
They list Win 8 on the main page
Web browser: Microsoft Internet Explorer 8.0 or a later version (32 bit version only)
NOTE: Firefox is NOT supported
Microsoft DirectX® End-User Runtime 9.0c or a later version.
o Help Installing DirectX
http://support.microsoft.com/kb/179113
Cortona3D Viewer 7.0 or a later version.
Rapid2DViewer 1.0 or a later version (for displaying the 2D graphics).
__________________
Luna was born in 2005 and is a Winnebago Journey 34H w/ CAT C7 350 [SIGPIC][/SIGPIC]
|
|
|
09-23-2015, 12:37 AM
|
#64
|
Winnebago Watcher
Join Date: Sep 2015
Location: California
Posts: 2
|
Just bought a 1985 Chieftain 22ft (chevy). We can't seem to find the fuse box. The book says "under the IP on the driver's side." It is not obvious - before we really start taking things apart I thought someone might know where it is. This is my first post sorry if I'm asking in the wrong place! thank you
|
|
|
09-23-2015, 08:54 AM
|
#65
|
Winnebago Owner
Join Date: Nov 2014
Location: Nomadic - Currently Near Lassen NF
Posts: 218
|
Quote:
Originally Posted by lpmax
Just bought a 1985 Chieftain 22ft (chevy). We can't seem to find the fuse box. The book says "under the IP on the driver's side." It is not obvious - before we really start taking things apart I thought someone might know where it is. This is my first post sorry if I'm asking in the wrong place! thank you
|
Start here and click "New Thread" near the top left.
Give it a good title such as "Can't find my fuse box on 1985 Chieftain".
and
:welcome:
__________________
Luna was born in 2005 and is a Winnebago Journey 34H w/ CAT C7 350 [SIGPIC][/SIGPIC]
|
|
|
09-23-2015, 10:22 AM
|
#66
|
Winnebago Watcher
Join Date: Sep 2015
Location: California
Posts: 2
|
Thank You for pointing me in the right direction!
[QUOTE=Nomad Mike;2755725] Start here and click "New Thread" near the top left.
Give it a good title such as "Can't find my fuse box on 1985 Chieftain".
|
|
|
01-06-2016, 08:30 PM
|
#67
|
Winnebago Owner
Join Date: Aug 2008
Location: Bellevue WA
Posts: 56
|
i own a 2016 minnie winne 22R, i do not see any information for the 2016's?? What am i doing wrong
__________________
2016 Minnie Winnie 22R; 2012 Lincoln MKZ toad;2013 F150 EcoBoost; 1st RV 2006 Wildwood 5er Bunkhouse; 2nd RV used 2001 Itasca Suncrusier
|
|
|
01-06-2016, 09:12 PM
|
#68
|
iRV2 Marketing
Join Date: Jan 2000
Location: Conway, SC
Posts: 886
|
Quote:
Originally Posted by doit
i own a 2016 minnie winne 22R, i do not see any information for the 2016's?? What am i doing wrong
|
I was able to bring up 2016 Minnie Winnie information - no problem.
Try this link:
2016 Winnebago Minnie Winnie
__________________
03 Adventurer 38G, Workhorse W22
F&R Track Bars, Safety+ , Ultrapower, Taylor Extremes, SGII
TST 507, Blue Ox, SMI, Koni FSD, CrossFire
RV/MH Hall of Fame - Lifetime Member
|
|
|
04-21-2016, 06:04 PM
|
#69
|
Winnebago Camper
Join Date: Sep 2015
Location: Saskatchewan
Posts: 32
|
Quote:
Originally Posted by tbrannon
i don't know if i am doing something wrong, but i cannot get the wiring and plumbing to show anything. any suggestions would be appreciated.
thanx, [email protected]
|
I can't get any of the diagrams to come up..I am on Apple products but haven't had problems with PDFs. Any one have a suggestion?
__________________
2002 Winnebago Journey DL 39QD, 2013 Jeep Wrangler, 2014 HD Limited, 1972 FX1200
|
|
|
04-22-2016, 03:53 AM
|
#70
|
Winnebago Owner
Join Date: Nov 2014
Location: Nomadic - Currently Near Lassen NF
Posts: 218
|
Quote:
Originally Posted by Petesflhtk
I can't get any of the diagrams to come up..I am on Apple products but haven't had problems with PDFs. Any one have a suggestion?
|
Looks like a problem on their end as I tried with my iPhone and they would not work either but my year's worked fine.
I will try tomorrow on a PC, but I used both Safari and Chrome.
__________________
Luna was born in 2005 and is a Winnebago Journey 34H w/ CAT C7 350 [SIGPIC][/SIGPIC]
|
|
|
05-27-2016, 06:31 PM
|
#71
|
Winnebago Camper
Join Date: Mar 2016
Location: BC
Posts: 21
|
Looking for diagram showing the heater controls
We have a 26 foot 1999 Brave SE on a Chevy chassis. It's a neglected survivor. I have almost everything working but can't figure out the heating/ventilation controls. The controls to direct the heat to the floor, the dash vents or defroster vents don't work. It appears they might be vacuum operated. All the tubes I can find are intact and connected to the control pots.
Searching the forum is not working for me. I'm hoping someone has a schematic they can post or can point me to a link for one.
__________________
Cheers
Rod
1999 Winnebago Brave SE 26'
|
|
|
05-28-2016, 09:25 AM
|
#73
|
Winnebago Camper
Join Date: Mar 2016
Location: BC
Posts: 21
|
Thanks for the link(s). I found a GM manual that mentions a vacuum pump that I didn't know existed. I was looking for a vacuum port on the intake and couldn't locate one.
It makes sense that it might be the source of my problem.
__________________
Cheers
Rod
1999 Winnebago Brave SE 26'
|
|
|
06-05-2016, 10:36 AM
|
#74
|
Winnebago Camper
Join Date: Mar 2016
Posts: 18
|
Quote:
Originally Posted by Radioflyer3
We have a 26 foot 1999 Brave SE on a Chevy chassis. It's a neglected survivor. I have almost everything working but can't figure out the heating/ventilation controls. The controls to direct the heat to the floor, the dash vents or defroster vents don't work. It appears they might be vacuum operated. All the tubes I can find are intact and connected to the control pots.
Searching the forum is not working for me. I'm hoping someone has a schematic they can post or can point me to a link for one.
|
I attempted to add a diagram-ignore the date range, yours is basically the same
__________________
Bill
1991 Winnebago Warrior 23EC Class A
|
|
|
06-14-2016, 08:33 PM
|
#75
|
Winnebago Watcher
Join Date: Apr 2016
Posts: 1
|
i am looking for the electric schematics for the auto electric parking brake. I have a 2001 Winnebago Adventurer Workhorse, 8.1 gas I have lost power, cannot find source of power
|
|
|
08-28-2016, 08:49 AM
|
#76
|
Winnebago Camper
Join Date: Jan 2015
Location: Manitoba, Canada
Posts: 5
|
I'm trying to locate the fuse for the levelling jacks on my 2013 Itasca Sunova 33C. I can find 2 locations for 12 volt fuses, one beside the entrance door and the other down low in front of the drivers seat, but no indication as to which fuse is for the levelling jacks. Not sure if there are any other 12 volt fuse locations. Any input would be appreciated.
|
|
|
09-03-2016, 09:28 AM
|
#77
|
Winnebago Watcher
Join Date: Sep 2016
Posts: 1
|
Scorpion 3480
We have a 2016 Winnebago Scorpion 3480 Toy Hauler and are trying to find the plumbing diagram or find out if an anode is required for the water heater. We just got this rig and haven't even taken it out camping yet! 😄
|
|
|
11-20-2016, 05:04 PM
|
#78
|
Winnebago Watcher
Join Date: Nov 2016
Posts: 1
|
I need a plumbing diagram for my '17 Micro Minnie. I don't see Micro Minnie listed.
|
|
|
11-21-2016, 06:00 PM
|
#79
|
Winnebago Camper
Join Date: Mar 2016
Posts: 18
|
Quote:
Originally Posted by PtSurDoc
I need a plumbing diagram for my '17 Micro Minnie. I don't see Micro Minnie listed.
|
2016 probably will be the same. Those are listed
__________________
Bill
1991 Winnebago Warrior 23EC Class A
|
|
|
02-06-2017, 08:41 AM
|
#80
|
Winnebago Master
Join Date: Jun 2013
Location: Full-timer/volunteer w/SOWERS
Posts: 2,739
|
Am I the only one to notice that after 2009 most of the wiring diagrams are gone and we are left mostly with installation diagrams? No more easy access to resources that will help us find fuses and locations of components through wire tracing. Also, I can't get the available resources to work in Firefox. I feel Winnebago is abandoning it's new rigs to the sharks of the RV service world. I miss being able to troubleshoot a wiring problem from the wiring schematic and helping a fellow RVer save a bunch of bucks at the same time. Just my two cents.
Rick Y
__________________
Rick & Melissa Young & Dawson (RIP), 2011 Meridian 40U, FL XCL, ISL 380HP/DEF, Al 3000 MH, 2014 Honda CR-V, SMI AF1, Blue Ox TruCenter & tow equip.,EEZTire TPMS.
Servants On Wheels Ever Ready. Best job we ever paid to do . (full time volunteers)
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|