Xantrex inverter problem

[Dennis L-WO]

New to Winnebago.
Shows "E 05" error message. Says to disconnect power to reset it. How do I do that?
Seems to be an overload somewhere. How do I find that? Turn off all the breakers, then turn them on, one at a time?

2011 Itatasca Suncruiser 32H

 

[al1florida]

New to Winnebago.
Shows "E 05" error message. Says to disconnect power to reset it. How do I do that?
Seems to be an overload somewhere. How do I find that? Turn off all the breakers, then turn them on, one at a time?

2011 Itatasca Suncruiser 32H

Disconnect from shore power and then remove the cables from negative battery posts on the house battery. There probably isn't a switch to remove 12V going to the inverter.

 

[al1florida]

OOPS! A better response may be, what is the wording on the error message? Looking online it seems that the 120V output see an overload. If the "reset" is to remove 12V then my first answer will take care of that.

Once you have 12V removed, turn off all the 120V circuit breakers and then reconnect the battery. Then turn the breaker on one at a time.