TV access for Roku on 2019 Vista LX 35F

[J&M124]

Hey all, wondering if anyone can shed light on best way to access the back of mounted Insignia TV - I’m hoping there is a HDMI port to hook up a Roku. As is, the TV is pretty tight to the wall….there has to be a way..!

 

[Scotty B]

Not sure about your rig or which TV you want to connect, but in the bedroom there is an HDMI port in the shelf space under the TV and above the drawers, one in the televator cabinet on the right side cabinet that the TV rises out of, and on the right panel next to the TV on the one outside. Thinking you must have them somewhere near each TV as well.

 

[Morich]

I see two TV as possible options. Is this for the frpnt, not the bedroom TV?
I see obvious connections shown on the rear but not so much info on the front!
We can get an excellent look at things like this on the interactive parts drawings but which do we need to look at?

I also see a video switch looks like maybe in a cabinet over the door, etc.? Not seeing hdmi there?? Does the Roku need to go directly on the TV back?

The drawings show fasteners, etc. as a clue to hold it is installed but which do we need?


We can dig down and get a look at the mounts but which?

 

[wyocamper-WO]

The 50" Insignia in mine has an HDMI port on the left side (as you face the TV). It's really tight but I got a cable plugged in using long needle nose pliers. That cable goes to an HDMI splitter that also has a blu ray connected. For power I don't remember if I didn't have access to a USB port, or if the port didn't have enough power. Either way, I mounted an outlet strip below the TV and plugged it into one of the inverter powered outlets.

 

[Morich]

Doing some looking and thinking likely the 39 in front, this gives a look at what is behind.
Click these snips for better view!

[/ATTACH]

 

[Morich]

Different drawing/view here:
https://www.winnebago.com/Files/Files/Winnebago/Resources/Diagram/2018/000128433.pdf
It does show HDMI on TV!