Trip Reset and Instrument Panel operation 2012 Itasca Meridian 42E

[Owen Bridgeman]

Is there a video out there that shows how to reset trip mileage and other information in the display are above the instrument cluster?

Thanks in advance.

 

[wahoonc]

I haven't seen a video. However, there is a "tree" diagram in the owner's manual. I am assuming yours is similar to my 2014. There is a square joy stick over on the side console that you use to scroll through, then select and clear by pushing to the right or left. Forward and rear are the scroll functions.

Aaron

 

[jerichorick]

It is a PITA. I have not seen any video showing how. The "tree" is near impossible to follow but can be conquered after the basics of using the control functions is understood.
The dash display shows 3 of the functions you choose to set. Getting the order straight is tough. You may have to write a list and try to program it as written.
Using the toggle control below the shift controller: Push the lever down once. The top line is highlighted in black. When in this state you can select the sub fields and do resets if available by moving the toddle to the left or right. If you toggle down in this state the next line will be selected. The time highlighted is short. Play around with this for a while and see what you discover. After you think you have a better understanding of the control functions read the manual. It may make a bit more sense. PRACTICE. PRACTICE. PRACTICE.

 

[tim myers]

I am not sure which display is on your year Motor Home, mine has the LBCU, Light Bar Control Unit and it is quite useful once you have it set up correctly and understand how to use it. My Freightliner Manual devotes an entire chapter to its use. Let me know what you have, though my manual is in the MH and the MH is in storage for the winter, I can run out and maybe scan some of the pages for you. The manual may also be available for download on the internet. I will look.