A member preparing for a trip discovered a small leak at the toilet’s plastic 90-degree water inlet in their 2016 Minnie Winnie 31H. They asked if the fitting was a standard size and whether a replacement could be found at Home Depot. Experienced RVers confirmed it’s typically a standard 1/2-inch PEX fitting, but noted that big box stores often lack the correct PEX clamps, recommending ACE Hardware or Amazon for spares. One member suggested tightening the fitting as a temporary fix, while...
More...
A member preparing for a trip discovered a small leak at the toilet’s plastic 90-degree water inlet in their 2016 Minnie Winnie 31H. They asked if the fitting was a standard size and whether a replacement could be found at Home Depot. Experienced RVers confirmed it’s typically a standard 1/2-inch PEX fitting, but noted that big box stores often lack the correct PEX clamps, recommending ACE Hardware or Amazon for spares. One member suggested tightening the fitting as a temporary fix, while another advised carrying extra seals due to common rubber deterioration.
The original poster found a temporary solution at Home Depot but ultimately had the repair completed for free at a local RV shop. They later reported a new leak near the water pump and speculated that using the city water hookup for the first time may have contributed. Members emphasized the importance of always using a water pressure regulator, especially in mountainous areas where pressure can spike and cause leaks.