Replacing Awning on my Micro Minnie 1808FBS

[Miagab49]

I have a Micro Minnie 1808FBS and planning to replace the awning due to wear. This looks like a simple job, however there always seems to be more to it than meets the eye. Any insights would be appreciated.

 

[JFlightRisk]

Hi and welcome!

We did our replacement fabric ourselves, and it takes a little time, but with three people doing/helping the process along with some basic tools and a couple of step ladders, it's easy enough. Take a look at Tough Tops Awnings website. At the top of their site is "DIY videos" that show just how to do it and what you'll need.

Tough Top Awnings | High Quality RV Replacement Awning Fabric

 

[Miagab49]

Hi and welcome!

We did our replacement fabric ourselves, and it takes a little time, but with three people doing/helping the process along with some basic tools and a couple of step ladders, it's easy enough. Take a look at Tough Tops Awnings website. At the top of their site is "DIY videos" that show just how to do it and what you'll need.

Tough Top Awnings | High Quality RV Replacement Awning Fabric

Thank you for your thought on the project and also the Tough Tops recommendation.
Best Regards,
Dan R, aka miagab49

 

[dickb46]

Like everyone said, it's not a tough job, BUT if you are cutting the fabric make sure you are cutting a exact 90 degree corner!