Hi everyone,
Just got the trailer out of storage for the winter. Still cold outside here so I wanted to heat up things a bit by using the furnace. It worked out of the box for a few minutes than died. Propane and power aren't the issue. I have the "blower runs fine for 30sec than off without ignition" type of situation which every post on the internet seems to indicate dirty or faulty sail switch.
My issue is when trying to pull the furnace. It won't come out. External vents screws out, internal bracket screws out, vent ports and propane disconnected check. It will move from right to left but move forward, seems stuck from the back, no visible screws...
Do I need to take off the external vent port and seal? Any ideas or recommandations?
Thanks
Just got the trailer out of storage for the winter. Still cold outside here so I wanted to heat up things a bit by using the furnace. It worked out of the box for a few minutes than died. Propane and power aren't the issue. I have the "blower runs fine for 30sec than off without ignition" type of situation which every post on the internet seems to indicate dirty or faulty sail switch.
My issue is when trying to pull the furnace. It won't come out. External vents screws out, internal bracket screws out, vent ports and propane disconnected check. It will move from right to left but move forward, seems stuck from the back, no visible screws...
Do I need to take off the external vent port and seal? Any ideas or recommandations?
Thanks
