Reassembling a Dream Dinette in a Micro Minnie 2108DS

[Zenrising]

We bought our 2022 Mico Minnie 21o8DS in December from 2nd owners. It had no records and sat for 4 years in Texas sun. I felt I did all the right due diligence even hiring a RV Tech inspector, but it has been a money drain. Sunday going on our 2nd road trip for two weeks to have fun and learn more about living the RV life.

Specifically, I need help putting back together the lifting / locking mechanism for the Dream Dinette. I needed to replace the dinette table top due to severe delamination of the grey laminated factory table.

I am kicking myself for not taking pictures before I disassembled the mechanical assemble under the table. Attached are some pics, the one with the red milk carton is where I am stuck. My next step is to take the whole Dream Dinette mounting mechasim out and build / assemble in garage and once assembled take entire (heavy) table / mouting mechasism back into camper and screw to the wall. I need to know how the 3 metal bars mout with the gas piston. I'm sure a few pictures and advice will help me to get the dinette table back mounted by Saturday

 

[be happy]

Welcome to the forum. I believe your best answer is in picture 3. I would give cass hudson a call, i bet they have the answer for you.

Cass Hudson Company

We are a material handling product distributor that specializes in casters, wheels, and specialty products for RV manufacturing. Our Melody Cradle Piano Dollies and our Dream Dinette lead the industry through innovation. We also have experience with Air-Bearings, Conveyors, Door Presses, Lift...

casshudson.com

Or if you do not need to table to go down, how about replacing with a small free standing table?

 

[Morich]

Maybe you are getting close to the info needed? Using the link above to get to the correct ads, they seem to show several good pictures that you might use to guide you.
Does this look like the parts you have?

Alterante plan might be to shop around your local area for a Winnebago trailer that might have the same and take alook. If the same perhaps take a lot of pictures of what you need to rebuild?

 

[Zenrising]

Found a Utube and new butcherblock dinette top is installed!

 

[Zenrising]

Maybe you are getting close to the info needed? Using the link above to get to the correct ads, they seem to show several good pictures that you might use to guide you.
Does this look like the parts you have?View attachment 2468271
Alterante plan might be to shop around your local area for a Winnebago trailer that might have the same and take alook. If the same perhaps take a lot of pictures of what you need to rebuild?

Maybe you are getting close to the info needed? Using the link above to get to the correct ads, they seem to show several good pictures that you might use to guide you.
Does this look like the parts you have?View attachment 2468271
Alterante plan might be to shop around your local area for a Winnebago trailer that might have the same and take alook. If the same perhaps take a lot of pictures of what you need to rebuild?

This picture would have saved me hours . This is the configuration I have. Thank you for taking the time to help.
Cheers
Myles