Outside dimensions for building a roof/palapa over a 2008 29R

[7997redtail]

Hello all

I've been looking for a diagram, that I've seen in the past, that shows the dimensions of the motor home. As I remember its like a mechanical diagram showing measurements to where the slides are, the windows etc.

I'm in the planning stage of making a roof over our unit. Its a semi permanent roof and deck like a Mexicana palapa. I was thinking of creating a 3D model of the RV so i can design the posts and deck etc.

Can someone point me in the right direction?

Thanks

 

[Morich]

Owners manuals here:

Operator Manuals | Winnebago Owner Manuals

Find and view the operator manual here by searching for your specific year and model from our list.

www.winnebago.com

Pages 1-4 and 1-5 seem to have that info?
More than I can cut and copy to get the notes on as well.
Maybe see if it gets what you need?

 

[7997redtail]

So close but that’s not it . I’ve seen that one and it’s what I used for the basic 3D shape. I’m looking for the one that shows the distance from the front to the first bump out then the next then the end etc.

Thanks for the post. But, I was just thinking I should go outside and measure it

Thanks Morich.

 

[Eagle5]

Hi 7997redtail,
Please do post your measurement results!
Thanks, Eagle5

 

[7997redtail]

Here you go. These measurements are not accurate. Consider them to be within an within an inch or two.

 

[7997redtail]

Heres a picture of the model. Im going to start building a roof and deck around it.

 

[Eagle5]

Hi 7997redtail,
Excellent!!!
Thanks, Eagle5