No. J1939 Data Error 2011 Tour 40CD

[Brndaj]

While driving, we lost speedometer, tach, oil pressure and water temperature gauges. No jake brake and no power on hills. (transmission not shifting properly) 2011 Winnebago Tour 40CD, freightliner chassis. Any help would be appreciated.

 

[dmctlc]

Have you shut down and restarted? If so and no change shutdown everything at the master for house and Chassis? Was there anything unusual that you might've first?

 

[JoeCastor]

j1949 error code

Did you check the Allison 3000 book in your manual case for the code meaning? If not, that's a good place to start. It will also tell you how to reset/clear the error code(s).
I had a similar problem with at least some of your failures on my 42QD. The code said it was the output speed sensor. About $130 for the part and less than half an hour to replace it (I watched a YouTube video).

 

[Brndaj]

We were able to get Freightliner to come out. What happened was there was a data wiring harness that fell (we're assuming a cable tie broke) and the fan blade from the engine sucked it in and cut it in two separate places. They had to splice the harness back together. The code just happens to be a generic code for it not reading data. We were real lucky that we were able to get to our campground albeit slowly but we got there.

 

[dmctlc]

That's great news thanks for the update...