Duner-WO
Senior Member
How does Winnebago mount the Norcold 1200 at the top? And how would you get access to top back side?
I'm trying to get the Norcold 1200 out on my 2004 Chieftain to install a Samsung residential type. Pulled the 8 screws on the front top/bottom. Removed 2 bolts on each side of the back sides near the bottom. Looked in from the bottom vent to see the back side near the top but don't see any bolts/screws to remove.
Got the bottom to slide out about 2 inches but the top is firmly in place and won't budge.
I removed the refrigerator vent on the roof to see if I could access bolts/screws thru the roof. But that vent is screened in so I would have to break the roof seal and remove the whole vent to get my hand/arm inside to find something.
Please tell me what I need to do....I want to get rid of this Norcold!
Thx,
Bill
I'm trying to get the Norcold 1200 out on my 2004 Chieftain to install a Samsung residential type. Pulled the 8 screws on the front top/bottom. Removed 2 bolts on each side of the back sides near the bottom. Looked in from the bottom vent to see the back side near the top but don't see any bolts/screws to remove.
Got the bottom to slide out about 2 inches but the top is firmly in place and won't budge.
I removed the refrigerator vent on the roof to see if I could access bolts/screws thru the roof. But that vent is screened in so I would have to break the roof seal and remove the whole vent to get my hand/arm inside to find something.
Please tell me what I need to do....I want to get rid of this Norcold!
Thx,
Bill

.
