RV_Lee
Senior Member
- Joined
- Jan 22, 2022
- Posts
- 206
So I've been resealing and doing maintenance to the rig after 10,000 miles. I checked the roof back in Arizona (Feb) and all was good. I got up there again about a week ago (humid Ontario) and almost had a heart attack, looks all lumpy and de-laminated. Did some research and saw they can do this depending on weather conditions. I'd almost say they cut the roof skin a bit too wide? Perhaps the ones that pop out and tear off were cut too narrow?
I assume these fiberglass roofs are being cut by hand at the factory.
I've been looking and see no evidence of any leaks
I assume these fiberglass roofs are being cut by hand at the factory.
I've been looking and see no evidence of any leaks
Last edited by a moderator: