Finding Exterior Body Parts 2003 Winnebago Brave

[Tnewt88]

2003 Winnebago Brave Itasca sun cruiser. Looking for front grill and drivers side panel.

Can't find used ones anywhere, do you know of any other years or makes that are compatible? see pics

Thanks

Tami

 

[Jim_HiTek]

There are over 3,000 RV salvage yards. Did you check some of them? I've even seen regular junk yards with 10's of RVs. Might be a long shot for that, it's much better to start calling RV salvage yards. Note that they often will NOT match your color request to what they have in the lot. Even if they have your color, they'll just pull the one that easiest to get to. Which means you'll have to pay to have any pieces repainted...I just drive to Mexico and have it done there. Los Algodones near Yuma has a shop that does that.

Here's a link to one RV salvage yard...Vison RV, but like I said there are over 3,000 of them.

I have some old links to RV salvage yards in the US but I'm in Mexico and none of them are working today for some reason, even with the VPN running. So you should do a google search.

As an aside, I've seen Mexican mechanics reproduce fiberglass body pieces for RVs down in Mazatlan but I don't recall any prices.

 

[creativepart]

Two of the best known RV salvage yards:

https://colawrvsalvage.com/

https://usedrvparts.visonerv.com/

Also, Icon Direst makes body parts for RVs. Here's a link:

https://www.icondirect.com/rv-exterior-parts/fender-skirts/?_bc_fsnf=1&brand=84

 

[Morich]

When calling, don't hesitate to ask if they are part of any network of salvage yards. There are some which can then put out word on a network and that covers a lot of places much quicker than working it one at a time!

 

[Blkbart]

Excellent advice! I too have seen some amazing fiberglass repair.

 

[Duner-WO]

Here's a link on the iRV2 forum on the same subject:
LINK

You might find some RV fiberglass repair shops in the east, like maybe around Hersey, PA or Richmond, VA or further south towards Florida.

Good luck,
Bill

 

[ftodaro]

If you get in a bind that is fixable. Any shop that works on corvettes can repair fiberglass. I repaired my own rear bumper and reinforced it with fiberglass and resin