Equalizer WDH Setup Advice for 2022 Micro Minnie FLX 2108TB

[parshal]

I installed an Equalizer WDH today and the measurements seem about right but I wanted to check with folks that have done more of this than me.

Trailer is a '22 2108TB FLX. Tow vehicle is a 2018 GMC Sierra 1500 standard bed (6.5') with the tow package.

Note, there's probably less than 100 pounds of stuff in the camper, no propane tanks and maybe 100 pounds in the truck bed along with a topper. I realize it will need to be readjusted once everything is loaded and ready to go.

I feel like I should drop the hitch on the shank down one set of holes to get the front of the trailer down that 1". The top of the ball was 1" higher than the top of the coupler when the trailer was perfectly level.



Uncoupled
Front 36.5"
Rear 37.5"
Hitch 18"

Coupled
Front 36.75"
Rear 37"
Hitch 17"

With bars installed
Front 36.5"
Rear 37.25"
Hitch 17.75"

Camper tandem axle
Front 24.5"
Rear 23.5"

 

[RayIN]

This is IMO the most comprehensive and accurate write-up on How to properly set-up an WDH that I have ever seen.

 

[parshal]

Thank you!

Seems I'm close.