Crooked drawer face 2018 Minnie Winnie 26A

[Arwe]

Hi to all. I'm happy to have found this group.
I have a 2018 Minnie Winnie 26A. The face of one of the small kitchen drawers is crooked. I removed the bolts on the inside surface but the drawer face doesn't budge so I presume that it's glued in place. Is there a way to remove the drawer face without crowbarring it off?
Thanks for any suggestions.

 

[Morich]

No idea about getting it apart but might want to take a good look at the slides on each side as those being off can make the front look crooked, so make sure you NEED the front off?
They can also have mounted the cabinet portion of the slide in the wrong spot to make the whole look like the front is wrong!
Not saying you are wrong but just something to look carefully?
Good luck with the fix!

 

[Arwe]

Thanks for your helpful suggestions.
The rails are in the correct position. The drawer face is crooked with respect to the drawer box so it has to be re-aligned.
Best regards.

 

[Bones2003]

Hi Arwe, it may depend how crooked your drawer face is. I had one that was not too bad but annoyed me just the same. I was able to adjust the slides on both the cabinet and the sides of the drawer into the "wrong" position. The drawer still worked fine but at least the face was no longer crooked!

 

[Arwe]

Thank you for the good suggestion. I'll look again but I think it's too crooked for that option to be practical.
Much appreciated.