C-7 Fuel Filters

[SCVJeff]

I think I have these right (both are hard to read). Do these look like the correct part #'s for the C-7 fuel filters?

Ext:
ABP/N122-53226FL02

Engine:
1R075


Also, where are you'all getting them from? Any reasonable online dealers? I won't be by the Freightliner center till almost March and don't want to wait.

Tnx, Jeff

 

[SCVJeff]

I think I have these right (both are hard to read). Do these look like the correct part #'s for the C-7 fuel filters?

Ext:
ABP/N122-53226FL02

Engine:
1R075


Also, where are you'all getting them from? Any reasonable online dealers? I won't be by the Freightliner center till almost March and don't want to wait.

Tnx, Jeff

 

[cbeierl]

1R0751 is the 2u CAT secondary filter.

ABP-N122-S3226FL01 (aka ABPN122R50419 or ABPS3226FL01) is a 10u Alliance primary/water separator.

ABP-N122-S3226FL02 (aka ABPN10GFS19593 or ABPS3226FL02) is a 30u Alliance primary/water separator.

You can look up Alliance (Freightliner) filters here: Alliance Filters

 

[Gary CA]

Hi Jeff:

I purchase my filters from Rush Truck Center in Sylmar, 12985 W. Foothill Bl. 818-838-6900.

The fuel filter is the CAT 1R0751.

I had an extra to verify. Do you know of any kits to relocate this filter? I had to pull the engine cover to change this one out. I saw no easy way to remove this filter from underneath.. Takes time.

The other filter I carry is the air dryer filter, Haldex---HDX DQ6050.

Fan belts:
Alliance GT17342 (short one).

Alliance 01-24730-004 8PK1813 20-7620 (large belt) a lot on numbers, I' sure they are all important.

 

[Pusherman]

Jeff, one other option for you would be to buy the filters direct from FL in Gaffney. Call 1-800-FTL-HELP, and I believe there is a parts prompt. If not, talk to Pat in service, and maybe she can transfer you to parts.

Gaffney tends to sell parts cheaper than at a FL dealer (and if your a FCCC member you get a 10% (?) discount to boot!). Obviously there will be shipping charges, but if you give them your VIN, you should be assured of getting the correct parts.

 

[SCVJeff]

Perfect! Rush is right over the hill. I'll try and bop over tomorrow. Know of any 4-point weigh stations around here?

Don: Duh.. I didn't even think about going to the factory. I wouldn't have expected them to have parts like this. I'm keeping this number on my master service list.

 

[SCVJeff]

CHRIS: Is there any reason I shouldn't be running an -01? Seems to make more sense.

 

[cbeierl]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">CHRIS: Is there any reason I shouldn't be running an -01? Seems to make more sense. </div></BLOCKQUOTE>

According to PartsPro at Access Freightliner, my chassis shipped with the 30u filter/separator (FL02) but on my initial service Albuquerque Freightliner used the 10u one (FL01) when they replaced it. At the time I didn't know the difference, but I've since stuck with the 10u filter for subsequent changes.