2025 Navion 24V Antenna adjustment ?

[DiZ-WO]

How do we adjust our antenna. We keep getting a error message... We have plenty of wifi, but we want local channels and live tv.. I found the antenna button and it is on.

 

[creativepart]

Some RVs, mine for example, have two Antenna buttons. One on the Cable/ANT splitter. And another on the ceiling is an antenna amplifier button.

You don't have the same antenna as I do, but I looked in your Operator's Manual and it mentions two power switches. One turns on the antenna's amplifier and the other one switches between cable TV and antenna TV.

Of course, then you also have to change the TV settings to Antenna and do a channel search for every new location. But that's a given.

Here's what your Manual says... but it looks kind of confusing to me.

 

[DiZ-WO]

Hello CreativePart! Thank you for your response. Yes, it is confusing. I have located and pressed the button in the upper cabinet, but still have NOT achieved results. I did get live local channels on our first trip but not our second. hmmm. Thank you for your time We definitely have a learning curve being our first time RV'ing.

 

[Pointyears]

Hello CreativePart! Thank you for your response. Yes, it is confusing. I have located and pressed the button in the upper cabinet, but still have NOT achieved results. I did get live local channels on our first trip but not our second. hmmm. Thank you for your time We definitely have a learning curve being our first time RV'ing.

My Vita only has one plate/button inside the TV cabinet even though my manual pages are identical to yours with the exception of the words "If Installed": Turn it on I get local digital stations after scanning, and turn it off I get nothing.

 

[DiZ-WO]

thank you! I could only find one! That helps. I will try again

 

[Morich]

Sounds like a look at the menu of the TV may help?
You may have the antenna and booster right but the TV may be looking for input on the cable connection, rather than the correct connection for the OTA.

 

[Morich]

This should get you to the drawings for the Coax/TV connections. There appears to be two options, so match the equipment you find to the correct drawing set, (1MP or 02P?) that fits the options on your specific RV.
But I think the manual is confusing the issue a bit as they mention the switch in two places and I think they are referring to a single plate and switch??
Down at the bottom for the coax drawings:
https://www.winnebago.com/Files/Files/Winnebago/Resources/Diagram/2020/20_524v_wire.htm

 

[Pointyears]

Sounds like a look at the menu of the TV may help?
You may have the antenna and booster right but the TV may be looking for input on the cable connection, rather than the correct connection for the OTA.

Yeah, my Element TV requires the Antenna input for OTA. I have it defaulting to HDMI1 where my AppleTV is hooked up.

 

[NavOwner]

If the button is on you’ll need to go to the tv menu and scan for channels. You’ll need to do this every time you move. The antennas are fixed, you cannot adjust the antenna itself.

 

[Pointyears]

If the button is on you’ll need to go to the tv menu and scan for channels. You’ll need to do this every time you move. The antennas are fixed, you cannot adjust the antenna itself.

It's omnidirectional.