2022 Minnie Winnie 22M Rear TV Removal

[NormKeller]

Any advise on removing it for replacing.

 

[Eagle5]

On my 2019 22M, it appears that you would:

1. Remove the cable splice that lays against the wall
2. Unplug the 120 VAC plug
3. Remove the two screws in the bottom, and then .............

That is all I can tell without having done it, but I assume with the two screws removed, you should be able to slide the TV up & off of the base angle bracket.
Please let us know how it works for you.
Also, why are you replacing the TV so soon?
Thanks, Eagle5

 

[NormKeller]

I will give that a try, can't see back there. Replacing with a smart tv like the front. Thanks!

 

[NormKeller]

Eagle5,

You seem quite knowledgeable about the Minnie's. I need to raise the rear of my 2022 22M. I have installed Sumo springs on the front, and will probably do the rear also. But I don't think that will raise the rear. Looking for another 2 inches. Thoughts?

Thanks!

 

[Eagle5]

Hi Norm,
I would recommend that you call a local spring shop to get custom rear leaf springs; perhaps somebody like this?
https://kelderman.com/
Please let us know how it goes (in a new Thread on the subject, of course).
Thanks, Eagle5